Our site use cookies.By continuing to use our site you are agreeing to our cookies policy.
New Elitech VGW-760 Wireless Refrigeration Digital Vacuum Gauge Meter HVAC Vacuum Pressure Temperature Tester Leakage Test



- New Brand Vacuum Gauge: Used to test system leak and discern vacuum pump quality of the evacuation in an HVAC and refrigeration system; accurate measurements from 19,000 Microns (atmosphere) to 0 Micron
- Free App (ioS and Android): Settable high/low-pressure alarm, you can receive remote notifications when readings move beyond a predetermined value. The data could be recorded and exported in Excel and PDF format.
- Long Transmission Distance: Elitech Pressure Gauge App is connected by wireless Bluetooth technology, up to 1187' in ideal conditions (no obstructions).
- Rubberized water-resistant housing (IP65 Rated); ensure a deep vacuum throughout the entire system and prevent the mist when the refrigerant caused by refrigerant bottle blasting.
- Multiple units:  Easy conversion between 8 measurement units: inHg, Torr, psi, mbar, mTorr, Pa, micron, Kpa.

Measuring range: 0-19000 micron
Operating temperature 0°F~140°F(-178°C~60°C)
Resolution: 0-400 1Micron
400-3000 10Micron
3000-10000 100 Micron
10000-19000 250Micron
Wireless transmission distance: 30m
Offline records: 9943 readings
Fitting: 1/4" Male Flare
Product size: 127*74*37mm
Power supply: 3 AA batteries
Max overpressure: 27.5 bar
Time in use: 180h
Units: inHg, Torr, psi, mbar, mTorr, Pa, micron, kPa

Operation Instruction
1 )Press to turn on the gauge before connecting it to a system It will take 10 seconds for the gauge to warm up. Then it enters normal display.
2)After power on, the gauge will display "----" if the current pressure goes above its measuring range. Data do not show until the measured pressure is within the range
Note: Keep the pressure below 27.5 bar, otherwise the sensor may be damaged.
3)Make sure the connection type of the access system matches with the gauge fittings. If not please use the included adapter.
4)Press and release the light button to turn on backlight. The backlight will be auto off two minutes later. Press in two minutes to turn off backlight directly
5)Press and hold the light button to switch measurement units.
6 ) Press and release the wireless button to enable wireless connection. Press it again to disable
wireless connection.
7)Press and hold the wireless button until "REC" appears in the screen to enable record function. Press and hold the wireless button again to disable this function.
8) Press and release the power button to turn off the gauge. Please use special tools to remove it.
Note: Please do not close the vacuum pump before removing the vacuum gauge from the system, or high pressure may occur in the system so that impurities will enter the sensor cavity.

Clean the sensor: 
The vacuum sensor may be contaminated by impurities in use. To ensure its accuracy, please follow the steps as follows:
1)Turn the gauge off and remove batteries
2)Inject acetone or alcohol (>70%)into the vacuum cavity with a dropper or a syringe. Tighten the nut and gently shake the gauge.
3)Loosen the nut and drain the fluid from the cavity. Repeat such operation 3 to 4 times.
4)Evacuate it or place it for 3 hours until the sensor gets dry.

Package contents:
VGW-760 Wireless vacuum gauge -------------------------------------1
AA alkaline batteries----------------------------------------------------3
User manual-------------------------------------------------------------1
Three-way connection --------------------------------------------------1
Bent adapter-------------------------------------------------------------1



Write a review

Please login or register to review

Elitech VGW-760 Wireless Refrigeration Digital Vacuum Gauge Meter HVAC Vacuum Pressure Temperature Tester Leakage Test

  • Views: 733
  • Brand: Elitech
  • Product Code: VGW-760
  • Availability: In Stock
  • £172.90

Additional Savings

Enjoy an additional 10% off. Use code EXTRA10 at checkout. 

Elitech STC-1000 Cooling and Heating Thermostat Temperature Controller 220V ( special offer) -25%
Product Overview: Elitech STC-1000 Thermostat Temperature Controller main functions as..
£18.65 £13.99
Elitech RC-4HC Temperature and Humidty Data Logger With External Steel Probe 16000 Points High Accuracy Reusable -30%
  Product Description: Elitech RC-4HC temperature and humidity data logger features a m..
£35.49 £24.99
Elitech RC-4 Temperature Data Logger With External Steel Probe 16000 Points High Accuracy Reusable -32%
*** Get extra 10% off for this product with coupon code EXTRA10    Product Descripti..
£24.99 £17.00