My Cart (0)

Temtop Air Quality Detector M10 Air Quality Monitor for PM2.5 HCHO TVOC AQI Professional Electrochemical Sensor Detector Real Time Display Rechargeable Battery

Monitor PM2.5, HCHO, TVOC and AQI by professional electrochemical sensorRun with rechargeable built in high-capacity battery (2200 mAh) for 6...

  • Product Code: M10
  • Availability: In Stock

Price: £99.99

  • Monitor PM2.5, HCHO, TVOC and AQI by professional electrochemical sensor
  • Run with rechargeable built in high-capacity battery (2200 mAh) for 6 hours
  • Colorful indicator light, 3 years Long lifetime sensors
  • Simple unique cube design, best for home, office and various occasions
  • Cyclic display mode by double click the button
  • Operation Steps

    1. Take out the detector and place it outdoors for more than 6 hours.

    2. Turn on the detector.

    3. Display

    HCHO concentration is displayed after power on. Press Button and PM2.5 concentration will show.

    Press Button again to display TVOC concentration.

    Press Button again to display AQI.

    Press Button to repeat this operation. Double press the Button to repeat this operation automatically at 3 seconds’ display interval. Double press the Button again to exit from cyclic display.

    3. View indicator color for corresponding status.

    The indicator color indicates air quality after the detector is turned on.

    Status

    Good

    Unhealthy

    Hazardous

    Color

    Green

    Yellow

    Red

     

    The indicator color indicates charging status when the detector is off.

    Status

    Charging

    Full

    Color

    Yellow

    Green

    4. When battery is low, please charge it by connecting the USB cable to a power source.

    5. It is suggested to calibrate the detector manually after three month use as follows.

    1) Turn on the detector and wait for about ten minutes.

    2) Use the pin to poke the hidden button until HCHO icon blinks in the screen.

    3) Place the detector outdoors for ventilation for ten minutes.

    4) HCHO icon does not blink, indication the calibration finishes.

     

    Parameter Index

    Status

     

     

     

    Pollutant

    Good

    Unhealthy

    Hazardous

    HCHO

    0.1mg/m³

    0.1~0.3 mg/m³

    0.3mg/m³

    PM2.5

    75ug/m³

    75~200 ug/m³

    200mg/m³

    TVOC

    0.6mg/m³

    0.6~1.6 mg/m³

    1.6mg/m³

    AQI

    100

    100~250

    250

     

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: air quality detector