Our site use cookies.By continuing to use our site you are agreeing to our cookies policy.
-7% Elitech GSP-6 Temperature and Humidity Data Logger Cold Chain Food with External Probe Sensor


Elitech GSP-6 temperature and humidity data logger is mainly used to record the temperature and humidity of food, pharmaceuticals and chemicals, etc. It is widely applicable to each link in storage and logistics of cold chain, such as refrigerated container, refrigerator truck, cooler bag, cooler cabinet, medicine cabinet, cold storage, laboratory, etc. This data logger conforms to GSP standard of new edition.


Large LCD Display

2.8'' LCD screen with large numbers allows you to easily read temperature and humidity data, and view other key data information such as status, alarm, date and time.

10s to 24hours interval for logging

Multiple Over Limit Alarm

When the temperature and humidity exceed the limit, the data recorder will promptly sound and light alarm reminder to avoid any unnecessary loss.

Dual Sensor

Equipped with an external temperature sensor and a newly upgraded external temperature and humidity integrated sensor, the temperature accuracy can reach up to ±0.3 °C, each sensor is 2 meters long, and can support 3 kinds of temperature and humidity detection modes.

Large Capacity and Reusable

Reusable temperature and humidity recorder for up to 16,000 points of temperature and 16,000 points of humidity data.



Package included:

1x Data logger  1x USB Cable  1x Temperature Sensor (2m)

1x Humidity Sensor (2m)  1x User Manual   1x 3.7 Lithium Battery


More details and Notes:

Combined using with Free Elitechlog software, it is convenient to set start-stop mode, recording mode, multiple alarm thresholds, automatic shortening of recording interval, °C/°F unit, etc.

Meanwhile, you can also view data list, graph, historical data, and multi-format report export.

1. Conforms to GSP standard of new edition

2. Two modes to save data: full record stop and cyclic record

3. Two pieces of built-in magnets are convenient to fix the data logger onto metal material surface.

4. The battery is not rechargeable.

5. No internal temperature and humidity sensors.




Humidity Accuracy ±3 % RH (25 ℃, 20%~90% RH); Others, ±5% RH
Humidity Measuring Range 10 %~99 %
Resolution Temperature 0.1 ℃, Humidity 0.1 % RH
Temperature Measuring Range -40 ℃~85 ℃
Temperature Accuracy ±0.5 ℃(-20 ℃~40 ℃;Others, ±0.1 ℃
Ambient Temperature -30 ℃~70 ℃
Power Supply Single-use 3.6V CR14505 lithium battery or powered via USB
Dimensions 165 x 99 x 66mm
nils 31/03/2020

Plug and Play Temperature and Humidity Data Logger
Great device to measure the wall temperature and local humidity.
So you can explore why mold can arise.
Software is also great.

Dirk Puels 31/03/2020

I put the temperature and humidity data logger into operation and checked the measured values with a calibrated device. Except for minimal deviations attributable to the device class, everything fits. Great!!!!

R. Nordmann 31/03/2020

Fine. You can see with the software great Tuesday temperature and humidity course. You can also zoom in on the curve for longer loggs. And of course, exporting to Excel
temperature and humidity I compared to a calibrated laboratory device. The deviations were very small and within the specified tolerance. I would like to buy the device again.

FERNANDO 31/03/2020

The temperature and humidity data Logger comes packed with the same quality as a mobile phone, the instructions in English,
for its operation it is necessary to install a program from the manufacturer's page and install it on the computer, then we connect it via USB and so we can download the graphics of the collected data, and this is necessary to be able to put it in mode RECORDING AGAIN.

Michele 31/03/2020

I had previously taken n similar temperature and humidity data logger but proved well taken unusable.
This is a forklift instead. Started working, he started recording, proving immediately reliable.
Beware of the external probes that must be connected in order to operate it.
The stop and restart commands are not very understandable and the management software does its job. Recommended purchase, great value for money.

Write a review

Note: HTML is not translated!
    Bad           Good






Temperature sensitive products such as foods, pharmaceuticals, and some chemicals are often monitored during shipment and logistics operations. Exposure to temperatures outside of an acceptable range, for a critical time period, can degrade the product or shorten shelf life.












Climate-controlled food processing or woodworking facilities require specific temperature and humidity conditions for inventory. A data logger helps recognize trends in environmental conditions, helping to troubleshooting HVAC problems before they get worse.











When specific laboratory or room climates are required, this data logger can reliably track humidity and temperature measurements at a variety of data sampling rates. The convenient design allows you to upload raw data, graph it, and share reports quickly.










Meteorological Research

Measure, store, graph and compare meteorological data using a high-quality data logger that captures temperature and humidity. Track trends and changes in the weather using the detailed-oriented software program.

Elitech GSP-6 Temperature and Humidity Data Logger Cold Chain Food with External Probe Sensor

Spring Sale 15% OFF

Coupon Code: SP15OFF

  • Views: 21080
  • Brand: Elitech
  • Product Code: GSP-6
  • Availability: In Stock
  • £42.99
  • £39.99

Free Shipping UK

Fast Shipping Worldwide

Tags: Temperature and Humidity Data Logger