My Cart (0)

PG-20 Digital Pressure Gauge for Air and Compatible Gases, Range -0.100 ~ 5.000MPa

Product Overview: The gauge can test pressure and temperature, featuring backlight, manual calibration, auto-off, units shift, low battery indicator, etc. With battery...

  • Brand: Elitech
  • Product Code: PG-20
  • Availability: In Stock

Price: £78.00 £34.9955% off

Product Overview: 

The gauge can test pressure and temperature, featuring backlight, manual calibration, auto-off, units shift, low battery indicator, etc. With battery life up to six months, the gauge is applied for monitoring pressure of pipelines and pressure vessels in refrigerant and maintenance.


Specification:

Pressure measuring range: -0.100 ~ 5.000MPa

temperature measuring range: -20°C ~70°C

Operating temperature and humidity: 10°C ~60°C; 35% ~ 85%RH

Resolution: Pressure: 0.001MPa; Temperature 0.1°C

Accuracy: Pressure: ±5%FS (22°C ~ 28°C); Temperature 0.1°C

Battery life: six months

Power supply: 3V CR2450 button cell

Sampling Period: 1.2s

Battery Indicator: displays "LOB" at low battery

Display: 30mm*15mm LCD/green back-light auto-off after 6s

Measurement Units: MPa

Out-of-Range Alarm: pressure: FULL


General Operation:

1. On/Off

Press Power button to turn on/off the gauge.

2. Temperature display

In power-on mode, press and release Power button to display temperature.

Press it again to display pressure. It will display current pressureafter 5 seconds of inactivity (this function is optional).

3. Backlight

Press and release ZERO/LIGHT to turn on backlight. It will be auto-off after 6 seconds of inactivity.

4. Zero

Press and hold ZERO/LIGHT for 3 seconds to zero. It will display 8.8.8.8 and then 0.000 after 3 seconds. Press and hold the button again for 3 seconds to display current relative pressure.

5. Auto-Off

Press and hold power button and ZERO/LIGHT until ON appears, indicating the Auto-Off function is enabled. The gauge will be auto-off after 15 minutes of inactivity press and hold the two buttons again until OFF appears the auto-Off function is disabled.


Write a review

Note: HTML is not translated!
    Bad           Good