The gauge can test pressure and temperature, featuring backlight, manual calibration, auto-off, units shift, low battery indicator, etc. With battery life up to six months, the gauge is applied for monitoring pressure of pipelines and pressure vessels in refrigerant and maintenance.
Pressure measuring range: -0.100 ~ 5.000MPa
temperature measuring range: -20°C ~70°C
Operating temperature and humidity: 10°C ~60°C; 35% ~ 85%RH
Resolution: Pressure: 0.001MPa; Temperature 0.1°C
Accuracy: Pressure: ±5%FS (22°C ~ 28°C); Temperature 0.1°C
Battery life: six months
Power supply: 3V CR2450 button cell
Sampling Period: 1.2s
Battery Indicator: displays "LOB" at low battery
Display: 30mm*15mm LCD/green back-light auto-off after 6s
Measurement Units: MPa
Out-of-Range Alarm: pressure: FULL
Press Power button to turn on/off the gauge.
2. Temperature display
In power-on mode, press and release Power button to display temperature.
Press it again to display pressure. It will display current pressureafter 5 seconds of inactivity (this function is optional).
Press and release ZERO/LIGHT to turn on backlight. It will be auto-off after 6 seconds of inactivity.
Press and hold ZERO/LIGHT for 3 seconds to zero. It will display 184.108.40.206 and then 0.000 after 3 seconds. Press and hold the button again for 3 seconds to display current relative pressure.
Press and hold power button and ZERO/LIGHT until ON appears, indicating the Auto-Off function is enabled. The gauge will be auto-off after 15 minutes of inactivity press and hold the two buttons again until OFF appears the auto-Off function is disabled.